24 Channels CV DMX And RDM Controller
video

24 Channels CV DMX And RDM Controller

24 Channels CV DMX and RDM Decoder
● DMX512 and RDM;
● Stand-alone function;
● Six PWM frequency;
● Linear or logarithmic dimming;
● Digital Numeric display.
Send Inquiry

Description

Technical Parameters

GLU Lighting, established in 2011, is one of the leading 24 channels cv dmx and rdm controller manufacturers and suppliers in China. Offering you customized service, we warmly welcome you to buy the high quality and beautiful 24 channels cv dmx and rdm controller from our factory.

 

Products Feature

QQ20241104101519

● 24 channels constant voltage output, Max. 5A current per channel, up to 2880W output power.
● Master & decoder mode, RDM function.
● Easy operation with OLED display and 4 buttons.
● DIM/CCT/RGB decoding mode selectable.
● PWM frequency 500/2000/8000/16000Hz selectable.
● 16bit (65536 levels) /8bit (256 levels) grey level selectable.
● Output dimming curve gamma value 0.1-9.9 selectable.
● Stand-alone RGB mode and 24 channel dimmer mode selectable,
work as DMX master(8 bit) to control other decoders.
● Comply with the DMX512 standard protocols.
● DMX signal optoelectronic isolation / amplify.
● Over-heat / Over-load / Short circuit protection, recover automatically.
● With fast self-testing function.

Mechanical Structures and Installations

3

Mechanical Dimensions

4

Wiring Diagram

5

                                                                                                                     RGB Strip ×  8

Note:

1. An DMX signal amplifier is needed if more than 32 decoders are connected, or use overlong signal line, signal amplification should not be more than 5 times continuously.
2. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of each DMX Signal line.
3. When the 24-way load is too large and the input power of one constant voltage power supply is insufficient, multiple constant voltage power supplies can be used. Up to 4 constant voltage power supplies can be connected as power inputs, each power supply can be 
used to supply 8 loads respectively.

Output PWM frequency

Std (2KHz)
High (8KHz)                               Higher PWM frequency, will cause lower
Mid (500Hz)                               output current, higher power noise, but more
Supr (16KHz)                             suitable for camera(No flickers for viedo)

Grey level

8bit
16bit (choose it if the DMX master support 16 bit)

Output dimming curve

Only valid for 8bit Grey level

Standard (Gamma 1.6)
Linear
Gamma0.1-9.9
It is recommended to use standard, 0.1-9.9 is for special requirements, long press < or > key to change 0.1-9.9.

6

★ For other information about detailed operation pls refer to the user's manual or consult our sales.

Hot Tags: 24 channels cv dmx and rdm controller, China, manufacturers, suppliers, factory, customized

Technical Parameters
Input and Output Safety and EMC Environment
Input voltage 12-24VDC EMC standard (EMC) EN55032:2015, EN61000-3-2:2014,
EN61000-3-2:2013,
EN55024 :2010/A1:2015
Operation temperature Ta: -30 ℃ ~ +55℃
Input current 120.5A
Case temperature (Max.) Ta: +75℃
Output voltage 24×(12-24)VDC Safety standard (LVD) EN 61347-1:2015
EN 61347-2-11:2015
Output current 24CH, 5A/CH IP rating IP20
Output power 24×(60-120)W Certification CE,EMC,LVD Protection
Output type CV Package Protection Over-heat
Warranty Size L335x W135 x H46mm Over-load
Warranty 5 Years G.W 1.289kg Short Circuit

Send Inquiry