2 Ways DMX Spliter

2 Ways DMX Spliter Main Feature

● One DMX512 signal input, repeat two ways DMX512 signal output, each allowing for 170 DMX devices to be connected.

● Dedicated to amplify, distribute and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512.

● High voltage isolation technology adopted for input/output interface, applied to DMX512 signal shaping and amplification after long distant transmission.

● Electrical insulation between input and output terminals, output terminals among channels

● Input isolated from outputs to 1000VDC.

● Outputs are isolated from each other to 1000VDC.

● Crimping terminal/RJ45 terminals input for input and output sides.

● Working with AC100-240V directly.

2 Ways DMX Spliter Mechanical Structures

 RJ45 Connector for DMX IN

 Crimping terminals for DMX IN & Power in

 RJ45 for DMX OUT 1 & 2 

 Crimping terminals for DMX out 1&2

2 Ways DMX Spliter Dimension

2 Ways DMX Spliter Connection and Wiring Diagram

Note:

1.DMX signal cable is three core shielded signal cable, the signal cable with positive, negative, when connect the DMX signal terminals pls pay more attention to the polarity.

2. When connect the decoder, please make sure to the corresponding positive, negative and GND.

3. The cable between splitter and decoders should not over 300meters.

4. Each output is capable of driving 170pcs additional DMX512 decoders.

5. An additional splitter must be added after 32pcs decoders. Cascade connection must not more than 4 PCS.

Hot Tags: 2 ways dmx spliter, China, manufacturers, suppliers, factory, customized