Touch Viedo Master Controller MR-CM12BK
● Supports a maximum load capacity of 450000 channels, greatly meeting the needs of customer projects;
● Support local brightness timing adjustment;
● Support one click restoration of factory default settings;
● Support console channel mode testing, facilitating on-site debugging of channel definitions；
● Supports monochrome, dual color RGB、RGBW、RGBWY、 And multi-color mixing control；
● Support offline and online partition management functions for multiple main controllers.
Description
Technical Parameters
MR-CM12BK
RS485 interface master controller description
MR-CM12BK Touch series master suitable for the night lighting project, launched the third generation of new solution products. The use of more high-end FPGA chips, support higher computing rates, and larger storage space, and can be expanded to support more on-load channels. Support capacitive multi-touch operation, greatly optimize the field debugging work, support up to 450,000 channel output. Surge protection 1.5KV and other features. Long-term operation in high and low temperature harsh environment.
Mechanical Structures
Front view
Back view
① Power Switch ② ③ Power/communication indicator light ④ SD card slot ⑤ ⑥ Adaptive network interface ⑦ Touch screen ⑧ 5PIN XLR interface ⑨ Power interface Power switch
⑧ 5PIN XLR Interface Definition
 |
① | ② | ③ | ④ | ⑤ | |
| DMX512 signal | GND | Data- | Data+ | Power supply 5V | NC | |
| GND | B(D-) | B(D+) | 5V | NC |
Note: The common definition of its pin signal is ① - GND, ② - B, ③ - A, ④ -5V. Pay attention to the definition of pin signals in the application, and connect them according to the actual situation.
Mechanical dimensions & Installation
Front view
Rear view
Top view
Note: The dimensions in the above three views are in millimeters (mm).
Connection and Wiring Diagram
Offline mode: MR-CM12BK is connected to the controller, as shown in the following figure:
External panel mode: MR-CM12BK is connected to a programmable touch panel, as shown in the following figure:
Note: It can support parameter adjustment such as programmable touch panel, scene calling, brightness adjustment, speed adjustment, etc.
Integrated online/offline mode
Connect to the computer and sub controller (prioritize online signal, automatically switch to offline signal when there is no online signal), as shown in the following figure:
DMX console: Select scene mode MR-CM12BK and connect it to the lighting console, as shown in the following figure：
Note: It can support parameter adjustment such as lighting control panel, scene calling, brightness adjustment, speed adjustment, etc.
For more details please refer to the attched datasheet.
Hot Tags: Touch Viedo Master Controller MR-CM12BK, China, manufacturers, suppliers, factory, customized
product Basic parameters
| Product Name | Touch the lighting management controller | Product Model | MR-CM12BK |
| Rated Voltage | AC 100V～240V±15%Vac50/60Hz | Rated Power | About 15W |
| Storage Medium | High-Speed SD Card (Standard) | Carrying channe | ≤ 450000 data channels |
| Communication interface and protocol | RJ45X2, standard UDP/TCP protocol | External calling interface | RS485X1 |
| Touch screen | 4.3-inch full-color TFT capacitive touch LCD screen | Communication speed | 100MB/1000M adaptive |
| Relative humidity | ≤ 95% (non condensing) | Working temperature | -40℃～80℃; |
| Dimension | 283mmX134mmX45mm | Fixed hole spacing | 268mm;68 mm |
| Protection level | IP20 | Net weight | 1.48kg |
| Installation method | Fixed hole installation method (see the above drawing) | Shell material | Iron (powder coating process) |
| Standard accessories | SD card x 1/card reader x 1/AC power cord x 1/warranty card x 1/foam paper box x 1/card holder x 1 | ||
Send Inquiry
