How To Solve The Problem Of Constant Current LED Flexible Strip

How to solve the problem of Constant Current LED Flexible Strip
      With the development of LED lighting, Constant Current LED Flexible Strip is a major artifact of indirect lighting, in the hotel, high-end shopping malls and home lighting applications are common. Seeing the light is not the light, is our constant understanding of the Constant Current LED Flexible Strip. As the light belt is a hidden installation, the light is not exposed, can effectively reduce the glare to bring the human eye discomfort. Therefore, Constant Current LED Flexible Strip in a variety of commercial space and home lighting is widely used, mainly used in light tank indirect lighting, large areas of luminous ceilings or luminous walls, as well as showcase or wall lighting.
    Constant Current LED Flexible Strip is good, but there is always a light effect when the unhappy. To solve the problem of light effect is not good, from the source grabbed, that is, when the choice of light with the election, the following Xiaobian share a few simple lights with a small Cheats, so you immediately become a light with experts!
    1, light uniform
1) lamp beads and lamp beads between the brightness to be consistent, which is related to the quality of LED lamp beads.
Quickly determine the method: with eyes! With the eyes to observe whether the light uniform light.
2) lights with the first and last to be consistent with the brightness, which is related to Constant Current LED Flexible Strip pressure drop problem.
Constant Current LED Flexible Strip requires power to drive light, when the LED drive power supply voltage drop is relatively large, connected to the long Constant LED LED Flexible Strip the end of the brightness will be inconsistent phenomenon.
Quick Judgment Method: Connect the required length, light the light band, and discharge it together, with eyes to observe.
    2, light color to be consistent
Light color consistency, but also test a Constant Current LED Flexible Strip lamp quality is qualified parameters.
Judgment method: look directly at the light belt, or to find sheets of white paper, vertical close to the LED light side, you can basically judge this light with light color is not consistent. Look with the eyes, is the most intuitive.
Color temperature to choose right
General light with products to provide 3000K and 4000K color temperature options. Sichen Constant Current LED Flexible Strip products are available in 4 color options, 2400K, 2700K, 4000K and 6400K. Hotels, high-end shopping malls and home, can choose the following low color temperature of 3000K, creating a warm atmosphere; office can choose a higher color temperature cold light source.
    3, good color rendering
Constant Current LED Flexible Strip is highly colorable, especially when used in large area luminous ceilings, as a basic lighting or used in showcase as a display when the color rendering index Ra> 80 is a professional LED lights with Must meet the requirements. This is also the national standard GB50034-2013 requirements.
More than a few selection of light with the tips, you can let us buy lights to pick when the more satisfied with the product. But the lights with the right election, the installation should also be installed.
Here also give you a few lights to install a light effect of the solution is not good.
    4, light effect is not neat
If the light effect is not neat, you can use the installation slot. As in the decoration, the wall of the paint itself can not be the ideal flat state, so prone to light irregularities. Use the installation box can effectively solve this problem.
    5, light can not come out
Constant Current LED Flexible Strip has a light-emitting angle of only 120 °, and some light boxes are too high to see the light from the Constant Current LED Flexible Strip. In this regard, the Constant Current LED Flexible Strip can be raised so that the distance between the lamp band and the edge of the lamp vessel is maintained at about 4 to 5 cm, or the lamp strip is attached to the side wall.
6, light with a long connection, the lamp with the end of the brightness is not enough
1) Use a higher power constant voltage driver. Do not use the 3A electrical appliances can drive 3528 soft light with 6 meters, but in order to prevent the lamp with the tail of the brightness is not enough, you can use 4A electrical appliances to ensure that the electrical have enough margin. But the power of the electrical power is not necessarily much higher, otherwise it will cause a waste.
2) Change the way the lamp is connected. 6 meters of 3528, you can use 5 meters +1 meters of light with parallel, can also be 3 meters +3 meters combination in parallel.
    7, Constant Current LED Flexible Strip is divided into soft and hard two categories, indoor and outdoor use of the lamp type and installation is also different. In the purchase and installation should be based on practical use to be carried out in order to ensure a good light, and extend the service life.