Bi-color LED Flexible Strip Longevity Maintenance Method
Sep 04, 2017
Leave a message
Bi-color LED Flexible Strip longevity maintenance method
LED lighting industry in the Bi-color LED Flexible Strip as an important home decorations, easy to use or not related to the quality of home life, but in general a lot of people do not care about two-color LED flexible with the maintenance of the problem, even if the two-color LED In fact, the two-color LED flexible tape in the use or installation when there is a certain law, if we follow the normal law of the use of light, then the Bi-color LED Flexible Strip with the life Is very long, Shenzhen Cheung lighting technology for everyone to share, two-color LED flexible with the longevity of the law:
1, the correct installation of Bi-color LED Flexible Strip
Proper installation of Bi-color LED Flexible Strip is a prerequisite for extending the life of the Bi-color LED Flexible Strip, if not properly installed, the Bi-color LED Flexible Strip can be easily broken, and sometimes even explode, very dangerous, such as toilet and kitchen color LED With the installation should be particularly careful, otherwise it will greatly shorten the life of Bi-color LED Flexible Strip, and choose light-colored Bi-color LED Flexible Strip with better light transmission, but easy to sticky ash, to be diligent to wipe, you can avoid the impact of light Penetration.
2, clean method to be correct
Two-color LED flexible tape with a period of time, in the above will be a layer of thick ash precipitation, affecting our vision, so we can not avoid regular cleaning, then clean up the process of careful not to change the structure of the two-color flexible LED, Replace the Bi-color LED Flexible Strip parts, after the end of cleaning and maintenance should be the same as the two-color LED flexible tape installed, do not miss, wrong two-color LED flexible with parts, the general two-color LED flexible with a dry cloth to wipe, and pay attention To prevent moisture intrusion, dust accumulation, hinder the lighting effect.
3, do not frequently switch Bi-color LED Flexible Strip
Two-color LED flexible tape in the use of the time do not frequently switch, because the Bi-color LED Flexible Strip in the frequent start of the moment, through the two-color LED flexible beads with the current is greater than the normal current, making the lamp beads temperature increased sharply accelerated sublimation, Which will greatly reduce its life, so to minimize the Bi-color LED Flexible Strip switching frequency.
First, the impact of Bi-color LED Flexible Strip on the overall life of the lamp
In general, the Bi-color LED Flexible Strip work is stable, good quality, with the lamp body itself is essential to heat, the market's high-brightness two-color LED flexible with the heat, Bi-color LED Flexible Strip is usually made by two-color LED flexible beads, Radiator, power supply, lens, lamp body shell, so heat is an important part, so if the LED can not be a good heat, its life will be affected.
Second, the impact of heat on high-brightness Bi-color LED Flexible Strip
If the heat of the two-color LED flexible tape is concentrated in the chip with very small size, the chip temperature of the lamp will rise as a whole, which will cause the non-uniform distribution of heat, the luminous efficiency of the chip and the lase efficiency of the phosphor powder. When the temperature exceeds a certain value , The device failure rate exponentially increased. Statistics show that the component temperature for each rise 2 ℃, reliability decreased by 10%. When multiple LEDs are arranged in a white lighting system, the heat dissipation problem is more serious. Solving heat management issues has become a prerequisite for high brightness LED applications.
Third, the relationship between chip size and heat dissipation
The most straightforward way to increase the power of a Bi-color LED Flexible Strip is to increase the input power and to increase the size of the pn junction in order to prevent the saturation of the active layer to increase accordingly. Increasing the input power necessarily increases the junction temperature, Efficiency is reduced. The increase in single-tube power depends on the ability of the device to derive the heat from the pn junction. The size of the chip is increased by maintaining the current chip material, structure, packaging process, constant current density on the chip, and equivalent heat dissipation The temperature will continue to rise.
