SPI Controller K-1000C

SPI Controller K-1000C Main Feature

 

● 32 to 65536 grade gray control, software Gamma correction processing.

● Supports various point, line and area light sources, supports various rules, and special-shaped processing

● The single port output of the controller can reach a maximum of 512/2048 pixels (the maximum 512 pixels of the DMX luminaire is exemplified by three channels). Standard DMX512 compliant interface, set DMX decode start address by buttons.

● The playback content is stored in the SD card, which can store up to 32 effect files. The SD card capacity supports 128MB-32GB.Under RF mode, match with RF 2.4G RGB/RGBW remote control.

● The controller can be used in a single unit or in multiple cascades. The cascade uses photoelectric isolation: anti-interference and better stability. The cascade distance between the two units can reach 150 meters, and 0.5 square meters of pure copper power cord is needed.

● The controller with the loaded chip can lock the loaded IC in the software or not. By adjusting the controller's chip button to select the loaded IC, this scheme is more flexible and convenient.

● The IC controller for DMX luminaires comes with a write address function; in addition, with our 2016 LedEdit-K V3.26 or higher software, one-click address function can be set.

● Supports on-board luminaires with 4 channel (RGBW) pixels or split into single channel point pixels.

● Enhanced TTL and 485 differential (DMX) signal output.

● The controller comes with 22 test effects and comes with DMX512 test function.

 

Remarks: 1. The controller carries 512 pixels of light, the speed can reach 30 frames/second, the speed of 1024 pixels can reach 25 frames/second, and the speed of 2048 pixels is about 15 frames/second (the above parameters are based on the 1903 protocol IC DATE, there will be differences between different IC).

2. The international standard DMX512 (1990 protocol) has a maximum load of 512 pixels. When the load is 170 pixels of the international standard, the speed can reach 30 frames/second, the speed of 340 points is about 20 frames/second, and the speed of 512 pixels is about 12 frames/second.

3. For the function of Beidou wireless synchronization, please contact sales staff or technical support for details.

00：UCS19**,UCS29**;TM18**,SM167**,WS28**,GS82**;SK6812 (Support max.2048 pixels)

01：SM16716,16726(Support max.2048 pixels)

02：P9813 (Support max.2048 pixels)

03：LPD6803 (Support max.2048 pixels)

04：LX1003,1203(Support max.2048 pixels)

05：WS2801(Support max.2048 pixels)

06：LPD1886(Support max.2048 pixels)

07：TM1913(Support max.2048 pixels)

08：TM1914(Support max.2048 pixels)

09：P9883,P9823(Support max.2048 pixels)

10：DMX(250kbps max. spoort 512 pixels, suggest to support ≤320 pixels)

11：DMX 500K(500kbps max. spoort 512 pixels, suggest to support ≤320 pixels)

12：DMX 250K-CZF (max. spoort 512 pixels, suggest to support ≤320 pixels)

13：DMX 500K-CZF (max. spoort 512 pixels, suggest to support ≤320 pixels)

14：UCS5603-Test (Support max.2048 pixels)

15：UCS5603A(Support max.2048 pixels)

16：UCS5603B(Support max.2048 pixels)

17：TM1814(Support max.2048 pixels)

18：INK1003(Support max.2048 pixels)

19：APA102(Support max.2048 pixels)

20：UCS8904(Support max.2048 pixels)

21：SM16714(Support max.2048 pixels)

22：SM16813(Support max.2048 pixels)

23：GS8512 (max. spoort 512 pixels, suggest to support

24：QED3110 (Support max.2048 pixels)

Remarks:

1. For RGBW four-channel luminaires need to select K-1000-RGBW, and above four-channel luminaires needs to select K-1000-RGBWYA.

2. The K-1000-W is required when carry the single-channel luminaire. In this case, one channel represents one pixel, and the software effect is white.

①③	DC 5-24V	DC 5-24V power positive input	⑨	CLK	Clock line(DMX lights address writing)
②	GND	DC power supply negative input		B	Signal -(DAT-)
④	POWER	Power indicator		A	Signal + (DAT+)
⑤	ERROR	Status indicator		IN A	Cascaded synchronization signal, connect the previous OUT A
⑥	SD card	SD card slot		IN B	Cascaded synchronization signal, connect the previous OUT B
⑦	GND	Ground line(negative)		OUT A	Cascaded synchronization signal, connect the next IN A
⑧	DAT	DATA line		OUT B	Cascaded synchronization signal, connect the next IN B

For more operation details please refer to download the datasheet.

Hot Tags: spi controller k-1000c, China, manufacturers, suppliers, factory, customized