Ultrathin Touch Ring 3/4 Channel 1/4 Zone RF Remote Control

● Apply to RGB and RGBW LED controller.
● Ultra sensitive color adjustment touch ring.
● Each remote can match one or more receiver.
● CR2032 battery powered.
● Operate with LED indicator light.
● White & Black available.

1. Before the first use, please remove the protective film on the battery.
2. If the LED indicator is not on when press key, it is due to dead battery or bad contact caused by multiple plugging, please replace the battery, or raise the battery shrapnel with a screwdriver

On/Off: Turn on/off light.
Color Ring: Touch to change static RGB color.
Mode: Short press run the next dynamic mode, long press 2s run mode cycle.
Speed/Saturation: For dynamic mode, adjust speed, short press 10 levels, long press 2s get the default speed.
For static color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
Bright+/-: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
R/G/B: Short press get red, green or blue color directly, long press 1-6s adjust R/G/B brightness continuously to achieve
millions of colors.
W+/-: For RGB light, short press turn on/off white(RGB mix), long press 1-6s adjust saturation continuously, namely
change current static RGB color to mixed white slowly.
For RGBW light, short press turn on/off W channel, long press 1-6s adjust W brightness continuously.
Scene: Short press recall the scene, long press 2s save the current color into the scene. The LED indicator will light up
longer when save OK.

On/Off: Short press turn on/off all zone light.
1,2,3,4 zone: Short press select and turn on zone light, long press 2s turn off zone light. Short press multiple zone
key fastly, will synchronous select multiple zone synchronously.
Color ring: Touch to change current zone static RGB color.
Mode: Short press run the next dynamic mode, long press 2s run mode cycle.
Brightness+/-: Static color, adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels
adjustment.
Speed+/- : Dynamic mode, adjust speed, short press 10 levels, long press 2s get the fastest or slowest speed.
W: For RGB light, short press turn on/off white(RGB mix), long press 1-6s adjust saturation continuously, namely
change current static RGB color to mixed white slowly.
For RGBW light, short press turn on/off W channel, long press 1-6s adjust W brightness continuously.
Scene: Short press recall the scene, long press 2s save. The LED indicator will light up longer when save OK.
4 zone recall or save synchronously.